Description
Ultrafuse® PP GF30 (Polypropylene w/ 30% Glass Fibre) – 700gr
BASF Material is proudly produced in Europe
Overview
Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of standard FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding applications. Other key properties of PP GF30 are high heat resistance and improved UV-resistance. All these excellent properties make this filament highly suitable in an industrial environment.
Properties
Techincal Data Sheet
- Extremely high stiffness
- High heat resistance
- UV resistant
- Chemical resistant
- Low density: 1066 kg/m3
Print Settings
- Nozzle Temperature: 240 – 260°C
- Bed Temperature: 20 – 40°C on PP strapping tape | 70 – 90°C with PPGF adhesive
- Bed Material: Glass + PP tape | Glass + PPGF adhesive | Buildtak + PPGF adhesive
- Nozzle Diameter: ≥ 0.6 mm
- Print Speed: 30 – 80 mm/s
Drying & Storage Recommendations
Ultrafuse PP GF30 filament should be stored at 15 -25°C in its original sealed package in a clean and dry environment. Drying should be done with these parameters:
- 60 °C in a hot air dryer or vacuum oven for 4 to 16 hours
Printing Profiles
To print the best possible way with BASF filaments
BASF provides you with a large range of printing profiles for their materials based on different well-known printer manufacturers like Ultimaker, Raise3D and BCN3D
View Printing Profiles Here
Notice
CA Residents: Prop 65 WARNING(s)