Description
Raise3D Premium PPA CF Filament – 1.75mm (1kg)
Raise3D Industrial PPA CF Filament 1.75mm
This filament is compatible with Raise3D Industrial PPA Support Filament.
Raise3D Industrial PPA CF Filament is a carbon fiber-reinforced composite filament material based on PPA (polyphthalamide or high-performance/high-temperature Nylon). Thanks to its high-performance Nylon matrix, this composite filament has superior mechanical and thermal properties when compared to other Nylon filaments. With well-controlled dispersion and length distribution of chopped carbon fibers (15 wt.%), PPA CF has a lower density, lower moisture absorption, high strength and rigidity, high wear and creep resistance, and excellent chemical and heat resistance. It is promising for end-use applications in the automotive, aerospace, electrical and electronics (E&E) industries.
- High rigidity and strength
- Better thermal performance
- Lower moisture absorption
- Dimensional stability
- Chemical resistance
- High strength-to-weight ratio
- Automobile
- Aerospace
- Electrical and electronics (E&E) industry
- Industrial end-use parts
- Technical Data Sheet
- Safety Data Sheet
- Extruder temp: 290-310C
- Bed temp: 65-80C
- Print speed: 30 – 210mm/s depending on the printer
- Cooling fan: Off
- Abrasion resistant nozzle recommended
- Dry filament for 4-6 hours at 80-100C and let cool to room temperature before printing
- It is recommended to anneal your parts to get the best material properties. We recommend putting the parts in for 6-8 hours and 80C and let cool to room temperature.
- Annealing
- Anneal for 8-12 hours at 80-100C and let the parts cool down to room temperature naturally.
- If you’re using same material supports, make sure to remove those before annealing as the support and part can adhere to each other permanently.
- If using PACF support material, leave it on.