Description
Formlabs Fast Cure
Formlabs Fast Cure
Post curing maximizes material properties for stereolithography prints, improving parts’ performance and achieving biocompatibility. Fast Cure is Formlabs’s most powerful and high-performance curing unit designed to cure dental parts in one to six minutes. Formlabs Dental resins have been rigorously validated and fine-tuned with Fast Cure to work safely and seamlessly in an end-to-end workflow. The touch screen makes it easy to start a cure cycle with preloaded validated settings for each Formlabs Dental resin.
Specifications | Fast Cure |
---|---|
Printer Compatibility | Form 2, Form 3B/+, Form 3/+, Form 3L/BL (limited height to 6.5cm) |
Dimensions | 27.5 x 31.0 x 31.0 cm 10.8 x 11.8 x 11.8 inch |
Weight | 8.2 kg 18 lbs |
Turntable Diameter | 18 cm (fits up to 8 horizontal dental arches) 7.1 inch |
Maximum Part Height | 6.5 cm (~vertical dental arch) 2.56 inch |
Operating Temperature | 5 – 35 degrees celsius |
Light Source | 56 LEDs |
LED Power | 200 W |
LED Wavelength | 405 nm |
Power Requirements | 100 – 200 V 5.4 A, 50/60HZ |
Validated with 17 Dental and Biomed Resins
- Custom Tray V1
- Dental LT Clear V2
- Denture Base
- Denture Teeth
- Draft V2
- Grey V4
- IBT V1
- Model V2
- Model V3
- Permanent Crown
- Surgical Guide V1
- Temporary CB
- White V4
- Biomed Amber
- Biomed Black
- Biomed Clear
- Biomed White
-
Speed: Cure all your finished dental parts in 1 to 6 minutes.
- Fast Cure cures dental parts 90% faster than Form Cure.
- Dental models: 1min
- Crowns and bridges: 5min
- Occlusal guards: 6min
- Surgical guides: 5min
- Fast Cure cures dental parts 90% faster than Form Cure.
- Instant heating: No preheating required thanks to 56 powerful LED lights with 9 levels to control the light intensity
- Safety and peace of mind: Entire workflow re-validated for biocomp applications in Formlabs controlled mode printing and under QMS (quality management system).
- Rotating turntable for uniform curing
- Removable tray makes it easier to keep clean and insert and remove parts – Delivered with 2 trays
- Active cooling: keeps the exterior cool to the touch
- Capacity: Fits up to 8 dental arches on the 18 cm diameter turntable
- Compact footprint: 27.5 x 31.0 x 31.0 cm
- Touch UI
- 7.9” Touch Screen
- Preloaded curing presets for 17+ resins
- Add your custom presets controlling time and light intensity levels
- Chamber height is limited to 6.5cm (works for vertical dental arch on supports)
- Back-to-back curing. We recommend letting the Fast Cure cool down for 10 min
- The chamber accumulates heat and we require users to wear heat-protective gloves to minimize the risk of burn
- Medical applications: With a chamber height of 6.5 cm larger anatomical models may not fit
- Validated some Biomed resins
- Biomed Amber Resin is the same as Surgical Guide Resin and is used in regions where Surgical Guide is not registered.
- Biomed Clear Resin is the same as Dental LT Clear V2 Resin and is used in regions where Dental LT Clear V2 Resin is not registered.
- Validated some Biomed resins