Description
BASF Ultrafuse® PA6 GF30 – 700 grams
BASF Ultrafuse® PA6 GF30 Filament.
Ultrafuse® PA6 GF30 contains 30% of special glass fibers, which are designed for filament making and 3D printing. PA6 GF30 has a reduced warping compared to neat PA6 which makes Ultrafuse® PA6 GF30, with its excellent layer adhesion and its compatibility with the water soluble Ultrafuse® BVOH, the right solution for industrial parts printable on any standard FFF printer. With its high wear and chemical resistance and the high stiffness and strength, Ultrafuse® PA6 GF30 is perfect for various applications in transportation or industrial tooling.
- Very high stiffness and strength
- Good chemical resistance
- Resistance to UV light
- High wear resistance
- Excellent layer adhesion
- Works with BVOH
- Tensile Strength (MPa): 78.3 / 46.4 (XY) , 14.9 / 12.2 (ZX)
- Englogation at Break (%): 2.2 / 3.2 (XY) , 0.8 / 1.9 (ZX)
- Flexural Modulus (MPa): 4694 / 2861 (XY) , 8103 / 4300 (XZ) , 2371 / 1070 (ZX)
- Impact Strength Charpy Unnotched (kJ/m2): 38.9 / 41.8 (XY) , 45.5 / 48.8 (XZ) , 2.2 / 3.1 (ZX)
- Impact Strength Izod Unnotched (kJ/m2): 38.4 / 36.9 (XY) , 38.7 / 41.4 (XZ) , 2.6 / 3.8 (ZX)
- HDT @ 0.45 MPa (°C): 110/114
- Nozzle Temperature: 240-280 °C
- Build Chamber Temperature: Passively Heated, Closed Chamber
- Bed Temperature: 70-100 °C
- Bed modification: Glass
- Drying Procedure: Dry the filament at 100°C for at least 5 hours
- Support Materials: BVOH
- Nozzle Diameter: ≥ 0.6 mm
- Print Speed: 30-60m/sec
To print the best possible way with BASF filaments
BASF provides you with a large range of printing profiles for their materials based on different well-known printer manufacturers like Ultimaker, Raise3D and BCN3D
View Printing Profiles Here
