Description
Bambu Lab – PLA Support Material (1.75mm) – White
Bambu Lab PLA Support
Bambu Lab’s PLA support material offers convenient and efficient support for your 3D prints. It’s easily removable by hand and provides a perfect support interface, making it suitable for use with all PLA materials. The support material comes with a basic reusable spool and maintains a consistent diameter of 1.75mm (+/- 0.03mm). This material is also compatible with the Bambu Lab AMS.
Support for PLA needs proper drying before printing: recommended drying temperature is 55 ℃ for 8 hours in a blast drying oven. Learn more about filament drying. Please refer to Filament drying cover on WIKI.
Please Note: This material should only be used for support interfaces and should never be used for printing models on its own. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.
Recommended Printing Settings
- Drying Settings (Blast Drying Oven): 55 °C，8 h
- Printing and Keeping Container’s Humidity: <20% RH (Sealed, with Desiccant)
- Nozzle Temperature: 220 – 230 °C
- Bed Temperature (with Glue): 35-45 °C
- Printing Speed: <200 mm/s
Physical Properties
- Density: 1.22 g/cm³
- Vicar Softening Temperature: N/A
- Heat Deflection Temperature: N/A
- Melting Temperature: 190°C
- Melt Index: 6.4 ± 1.2 g/10 min
Mechanical Properties
- Tensile Strength: N/A
- Breaking Elongation Rate: N/A
- Bending Modulus: N/A
- Bending Strength: N/A
- Impact Strength: N/A
PLA Support
- Colour: White & Black
- Nozzle Temperature: 210-230°C
- Bed Temperature: 35-45°C
- Print Speed: <200mm/s
- Water Soluble: No
- Cannot be used with: PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA
PA/PET Support
- Colour: Green
- Nozzle Temperature: 270-290°C
- Bed Temperature: 80-100°C
- Print Speed: <100mm/s
- Water Soluble: No
- Recommended For: PA6-CF,PAHT-CF,PA-CF, PA-GF, PET-CF
- Cannot be used with: PLA, ABS, PETG, TPU, ASA
- Filament TDS
- Filament MSDS
- Filament RoHS
- Filament & Desiccant
- Box
- Filament Label
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through the Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.
