Description
BASF | Ultrafuse® BVOH Filament
PrintDry Filament Dryer Pro3
BASF Ultrafuse BVOH, an ideal water-soluble support material for your 3D print Printing complex designs may only be possible with temporary support structures. BASF Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature.
- Nozzle Temperature = 190 – 210 °C / 374 – 410 °F
- Bed Temperature = 60 – 100 °C / 140 – 212 °F
- Bed Material = Glass
- Nozzle Diameter = ≥ 0.4 mm
- Print Speed = 30 – 60 mm/s
- Drying recommendations to ensure printability = 60 °C in a hot air dryer or vacuum oven for 4 to 16 hours
- Density 1138 kg/m3 / 71.0 lb/ft3
- Glass Transition Temperature = 69 °C / 156 °F
- Crystallization Temperature = 122 °C / 252 °F
- Melting Temperature = 175 °C / 347 °F
- Melt Volume Rate = 11.4 cm3 /10 min / 0.7 in3 /10 min (210 °C, 2.16 kg)
The components of this filament are butenediol vinyl alcohol copolymer based filament for Fused Filament Fabrication.
BASF Ultrafuse BVOH filament should be stored at 15 – 25°C in its originally sealed package in a clean and dry environment. If the recommended storage conditions are observed, the products will have a minimum shelf life of 12 months.
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
This spool comes in 2.85mm ot 1.75mm diameter filament spools of 350gr
To print the best possible way with BASF filaments
BASF provides you with a large range of printing profiles for their materials based on different well-known printer manufacturers like Ultimaker, Raise3D and BCN3D
View Printing Profiles Here
