Description
Bambu Lab Complete Hotend Assembly (X1 Series)
Bambu Lab Hot Ends For The X1 Series
The Bambu Lab 3D Printer offers a range of hot ends with different nozzle sizes. The 0.2mm nozzle is ideal for achieving optimal print fineness with extremely small layer gaps, resulting in more detailed vertical print surfaces. It’s also great for high-resolution horizontal print surfaces by extruding thin filaments. On the other hand, the 0.6mm and 0.8mm nozzles are designed for faster print speeds, as their larger diameters extrude more filaments per second. The 0.4mm nozzle is considered the standard for a balance between print quality and speed and is used in both the Bambu Lab X1 Series and P1 Series 3D printers. If you need to change your nozzle, you can replace just the nozzle or the entire hotend assembly.
- Complete Hotend Assembly – X1 Series
- M3-14 Step Screws * 2
X1 Series Exclusive
- Max. Printing Temp.: 300°C
- Packaging Weight: 40 g
- Length: 47.3 mm
- Packaging Size: 190*70*50 mm
0.2mm Nozzle
Optimal Print Fineness
Extremely small layer gaps
More detailed on the vertical print surface
0.2mm Nozzle
Optimal Print Fineness
Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface
0.6mm and 0.8mm Nozzle
Faster Print Speed
Larger diameter extrudes more filaments per second, resulting in faster print speed
The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1 Series 3D printers.
| Material | 0.2 mm Nozzle | 0.4 mm Nozzle | 0.6 mm Nozzle | 0.8 mm Nozzle | Hardened Steel Required? |
| General PLA | YES | YES | YES | YES | Optional |
| PLA Sparkle | *NO | YES | YES | YES | Optional |
| PLA Marble | *NO | YES | YES | YES | Optional |
| Wood/Rock/Metal-filled PLA | *NO | YES | YES | YES | Optional |
| PETG | YES | YES | YES | YES | Optional |
| PVA | YES | YES | YES | YES | Optional |
| ABS | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| PC | YES | YES | YES | YES | Optional |
| PA | *NO | YES | YES | YES | Optional |
| TPU | *NO | YES | YES | YES | Optional |
| Bambu PLA-CF | *NO | *Highly Recommended | YES | YES | *Required |
| Bambu PETG-CF | *NO | *Highly Recommended | YES | YES | *Required |
| Bambu PAHT-CF | *NO | YES | *Highly Recommended | YES | *Required |
| Bambu PET-CF | *NO | YES | *Highly Recommended | YES | *Required |
| CF/GF Filaments from other brands | *NO | Not Recommended | YES | YES | *Required |
If you need to swap your nozzle, you can either replace the Hotend with Nozzle on your original complete hotend assembly or replace the whole Complete Hotend Assembly.
Learn more about replacing the complete hotend assembly on Bambu Lab Wiki.
